Automatic operation for intelligent fan control
Achieving optimum extraction of kitchen vapours and odours – while also saving energy: A Miele cooker hood equipped with Con@ctivity 2.0 does this automatically. Miele Con@ctivity 2.0 enables the cooker hood to communicate with the hob. Con@ctivity 2.0 gathers information from the hob and transmits it to the controls in the cooker hood. Your Miele cooker hood then uses this data to automatically select the correct fan setting to ensure the optimum room microclimate at all times. So you can concentrate completely on the cooking process. You don’t even have to remember to switch off the appliance. With the automatic run-on control, the cooker hood will switch itself off automatically after you have finished cooking so you do not use any more energy than is necessary. Manual operation is also possible.
Convenience and safety in detail
Located behind the grease filters is the Miele CleanCover: Instead of sharp metal edges and electrical components you will find only a sealed, smooth surface. It is particularly easy to clean and protects you from coming in contact with cables and motor components. Miele attention to detail – for your convenience and safety.
Stainless steel grease filters (10-layer)
Aesthetically pleasing and highly functional
Miele cooker hoods are equipped with a 10-ply stainless-steel grease filter. The top layers and filter frame are made of high-quality stainless steel. “When you conveniently clean the grease filters in the dishwasher, no visible discolouring will occur,” and the Miele grease filters keep their high-quality appearance for a long time.
The customer’s wishes are the highest priority for Miele. Design preferences, length of the ducting system, room setup, cooking habits, user height or special requirements – many variables must be taken into consideration when choosing a cooker hood. On request, Miele will adapt the chimney height and the canopy width and depth to your requirements. You also have the option of ordering a cooker hood in a RAL colour of your choice.
Booster setting switch-off
Programmable maximum power
The Booster setting provides very high air flow and is only intended for brief operation, for example, when heavy smoke or strong odours develop when food is burned. The Booster setting can be programmed so that the fan automatically switches back to Setting 3 after 5 minutes. This avoids unnecessary energy consumption.
High-quality and powerful motors
Miele cooker hoods are equipped with high-quality radial fans that provide suction on two sides. These high-performance units guarantee powerful air throughput at all times as well as optimised extraction. Despite their high performance, the fans operate at a comfortably low noise level.
Powerful lighting with minimum energy consumption
LED spotlights are an optical highlight and are environmentally friendly. A Miele LED spotlight consumes only 3 or 4.5 W and thus saves a lot of electricity. Miele LEDs illuminate the hob with a warm, natural and even light.
Active AirClean filter
A completely odour-free kitchen
Miele recirculation mode cooker hoods always require an Active AirClean filter in addition to the grease filter. This Miele filter removes odours efficiently and long-term.
Handcrafted in Germany
Each Miele cooker hood is unique.
Almost all Miele cooker hoods are developed at Miele’s Arnsberg plant and are, for the most part, hand-crafted. Each cooker hood is unique. Every stage of the manufacturing process involves a certain amount of manual craftsmanship: From shaping the steel to welding and polishing. The commitment of employees, their expertise, creativity and desire to excel have contributed greatly to Mieles position in the market today.
Miele cooker hood canopies and towers are made from high-quality welded and polished stainless steel. Even from the outside you can see the quality of a Miele hood: Precise contours and precision joints are typical characteristics of Miele cooker hoods. Enjoy perfect workmanship!